Proper Coatings Estimator

Interior

Interior is not part of this bid. Turn on Include to price it.

Wall condition

Paint quality
Wall coats
Ceiling coats
Trim coats

Walls and ceilings

Wall LF is the total length of every wall in the room, measured along the floor. A 12 × 12 room is 48 LF. Leave ceiling at 0 to skip it. Tap L×W on a room to enter length and width instead.

Add a room

Trim and doors

BaseboardsTotal LF of baseboard
DoorsBoth sides of the door plus its frame
Window trimCasing and sill, per window
Crown moldingTotal LF
Chair rail / other trimTotal LF
ClosetsMedium closet: walls, shelf and door
Door frames onlyOpenings with no door, or doors you skip

Trim prep

Tap the prep the trim needs. It's priced from the baseboard LF, doors and windows above.

Cabinets

DoorsRegular upper and lower doors, both sides, plus the boxes and face frames
Tall doorsPantry, broom closet or full-height doors, about twice a regular door
Drawer frontsFront only
IslandsPainted all the way around
End panels and extrasFinished sides, fillers, crown or toe kick runs

Priced per piece from your cabinet prices in ⚙ Settings → Rates and prices.

Add an extra

Exterior

Exterior is not part of this bid. Turn on Include to price it.

Surface condition

Coats
Paint quality

Walls by side

Measure each side on its own: length in LF and height from the ground to the roof edge (about 9 ft per story). If the side has a peaked gable, enter how far the peak rises above the wall top. A 30 ft gable on a normal roof rises about 7.5 ft.

Add a side

Trim and doors

Window trim and shutter condition

FasciaBoards along the roof edge and gable rakes, total LF
Soffits / eavesUnderside of the roof overhang, total LF
Entry doorsDoor and frame
Window trimPer window, outside
Garage doors2-car door with its frame
ShuttersPairs
Downspouts and guttersTotal LF
ColumnsPorch or patio columns
RailingsTotal LF
DeckDeck surface, solid color stain
Lift or scaffoldRental cost for the job

Patio cover

Posts
Cover type

Size is length × width of the cover. Lattice covers take about twice as long as solid ones.

Fencing

Fence type
Paint

Fascia replacement

New boards

Tear off damaged fascia, install new boards and haul away the old ones. Paint the new boards with the Fascia and soffit line. Board prices are under Your rates and prices on the Bid tab.

Add an extra
Your bid
$0
30%
0%
Contract language
Show each item's price on the estimate

Send to customer

Scope of work

Scope of work

Start with interior, exterior or cabinets. To talk, tap Talk, then the microphone on your keyboard.

Job photos

    Paint order

    Gallons come from your measurements at your PaintScout coverage. Add colors when the customer picks them. They also print on the crew work order.

      Your rates and prices

      Locked. Enter the owner PIN to see costs and change rates, prices and discounts.

      Set these once. They stay saved on this phone and apply to every bid.

      These fill in the contract notices California requires on home improvement contracts. Check the insurance details with your agent.

      Labor cost is what one painter-hour costs you. $35 is a $275 day over 8 hours; if your painters are on payroll, add your payroll taxes and workers' comp rate on top. Overhead and profit is added on top of every cost; 25–40% is common. Commission on gross profit is a share of what's left after labor and materials, so discounts cut the salesperson's pay too (20–35% of profit is common). Commission on the sale price is built into the bid so your profit stays whole. These are your defaults; the sliders on each bid can change them for that bid only.

      Commission is paid on

      Sundries covers tape, plastic, caulk, patch and roller covers, as a percent of the paint bill.

      Extra labor added to window trim and shutters when their condition is Fair or Poor. 100% means they take twice as long. Fascia and soffits use your PaintScout scrape, sand and spot-prime rates instead: 70 LF an hour when Fair, 30 when Poor.

      Dunn-Edwards price per gallon (your account)
      GoodBetterBest Int. walls $ $ $ Int. trim $ $ $ Ext. body $ $ $ Ext. trim $ $ $

      Good: Spartawall, Spartawall SG, Acri-Hues, Spartashield SG. Better: Suprema, Suprema SG, Spartashield, Evershield SG. Best: Everest, Aristoshield, Evershield, Aristoshield.

      Same price on every tier

      Prices before tax. Tax on materials is added on top.

      What each tier includes

      Shown on the customer view, quote and PDF. Only list what your crew can deliver on every job. The surface condition sets the prep: Good light, Fair medium, Poor heavy. Better adds 15% more scraping, patching and priming time, and Best 30%.

      Cabinet prices (what the customer pays)

      The door prices cover both sides of the door plus its share of the boxes and face frames. Inside of the boxes counts a tall door as two. The app still counts hours and paint for each piece, so your cost, profit and crew days stay right.

      Fascia board price per LF
      Change the owner PIN on this phone
      How the math works
      • Production rates come from your PaintScout. Each rate depends on the number of coats. Walls: 125 / 100 / 85 sq ft per hour for 1 / 2 / 3 coats (80 / 60 / 45 over 10 ft). Ceilings 125 / 100 / 75. Baseboards 35 / 20 / 10 LF. Crown 25 / 15 LF. Doors 0.75 / 1 / 1.5 hr per side. Windows 1 / 1.5 / 2 hr. Stucco 125 / 85 / 65 sq ft, textured stucco 80 / 60, Hardie 100 / 85, wood siding 150 / 100, brick 100 / 85. Fascia 40 / 25 LF (1st story), soffit 20 / 15 LF. Exterior windows: vinyl with trim 0.25 / 0.5 hr, vinyl only 0.1 / 0.2, wood 1 / 1.5.
      • Wall area is wall LF × height, minus about 21 sq ft per door or opening and 15 sq ft per window. Exterior gable sides add half of LF × gable rise.
      • The tier sets the prep. Inside: masking at 300 sq ft per hour, nail holes 0.25 / 0.5 / 1 hr per room, and spot priming 0 / 10% / 20% of the walls at 100 sq ft per hour, for Good / Better / Best. Outside: washing at 600 sq ft per hour, masking at 300, and light / medium / heavy prep at 150 / 100 / 85 sq ft per hour. Fair surfaces get at least medium prep and Poor surfaces get heavy prep on every tier.
      • Interior trim prep adds caulking at 150 LF per hour, sanding at 80 and filling holes at 150; a full prime coat uses your PaintScout prime rates. The interior trim price boost is added on top of every interior trim line.
      • Trim condition adds labor and primer to fascia, soffits, window trim and shutters when they are Fair or Poor. You can change both under Your rates and prices.
      • Setup and cleanup add 1 hour per room inside and a few hours per story outside.
      • Paint is priced from your Dunn-Edwards account prices for each tier, at your PaintScout coverage per coat (walls and ceilings 350 sq ft a gallon, stucco 200, textured stucco 100, fascia 700 LF, soffits 75 LF), rounded up to whole gallons. Tax on materials is added on top.
      • Each line price is its labor, its share of paint, sundries and tax, plus your overhead and profit, rounded to the nearest $5. The "don't go below" number keeps only a 10% margin.
      • Owner PIN: rates, costs, margins, commission and discounts stay hidden until the PIN is entered. Salespeople can raise the price with the slider but not lower it. It keeps honest people honest; it is not bank-level security.
      • Payment schedule: three payments. Downpayment of 10% or $1,000, whichever is less (California's limit). Then a payment when the paint and materials are delivered, about what they cost you, never more than half of what's left. The rest at completion. Signed change orders add their own payment or change the completion payment.
      • Custom items priced by hours and materials are marked up like every other line (labor at your hourly cost, materials plus tax, then overhead and profit). A flat-price item goes on the bid exactly as typed; add your cost so the margin and the "don't go below" number stay right.
      • Discount comes off last, after the minimum job charge. It lowers your profit and, when commission is paid on profit or on the sale price, the salesperson's commission too.

      My bids

        Bids save on this phone. Tap Edit to keep working on one. Tap the status to change it: Draft, Sent, Won, Lost. Sending or downloading the PDF marks a bid Sent, and a customer signature marks it Won. Two days after a bid is sent it shows up under Follow up; text, email or call from there and the app reminds you again three days later.

        $0